KT-E800PCT High Temperature & High Pressure Accelerated Life Aging Test Chamber
Application: It is used for accelerated life tests on products in aerospace, auto parts, electronic components, plastics and other industries. Applied in the product design phase to expose defects and…
Application: It is used for accelerated life tests on products in aerospace, auto parts, electronic components, plastics and other industries. Applied in the product design phase to expose defects and weak points of products.
Item
Parameter
Temperature Range
+100℃ ~ +132℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±1.5℃
Humidity Range
100% R.H. Saturated Steam
Humidity Fluctuation
±1.5% R.H.
Humidity Uniformity
±3.0% R.H.
Internal Chamber Gauge Pressure
0 ~ 2.8 kg/cm²
Absolute Pressure
1.0 kg/cm² ~ 3.0 kg/cm²
Safety Pressure Rating
4 kg/cm² (1 standard atmospheric pressure + 3 kg/cm²)
Pressure Range (Gauge Pressure)
0 ~ 4 kg/cm²
Circulation Mode
Natural convection circulation of water vapor
Test Time Setting
0 ~ 999 Hr
Pressurization Time
About 45 minutes from 0.00 kg/cm² to 2.00 kg/cm²
Compliance Conditions
Meet working conditions: 110℃, 90%RH, 2 atm; or 120℃, 95%RH
Temperature Rise Time
Approximately 10 minutes for no-load non-linear heating from 100℃ up to 125℃
Remark
The temperature change rate refers to the average change rate of air temperature instead of the product temperature
