KT-UF120 Ultrasonic Flaw Detector
The KT-UF120 Ultrasonic Flaw Detector is an ultra-compact, portable measuring instrument. It can realize thickness measurement of metals or magnetically conductive materials, detect internal defects of products (such as cracks, inclusions, pores, etc.), and automatically perform positioning, evaluation and diagnosis. It is widely used in laboratories, special inspection institutes, shipbuilding, oil and gas equipment, aerospace, military industry, chemical industry, electric power, iron and steel, metallurgy, railway, automobile manufacturing, machinery, boiler and pressure vessels, special equipment, petroleum pipelines, construction industry, mold manufacturing and other industries.
Product Features
- Lightweight body, suitable for single-hand operation.
- PD65W fast charging, up to 12 hours of long endurance.
- Equipped with a 5.0-inch IPS high-definition display and brand-new UI interface to bring a refreshed user experience.
- Supports full-screen touch, quick gesture operation and virtual keyboard for convenient operation.
- Professional functions including DAC, AVG, automatic gain, peak memory, color half-span and gate tracking.
- Many practical functions such as Chinese/English switching, data export to SD card, online upgrade and screenshot are available.
- The instrument stores standards including JB47013-2015, GB11345-89, GB11345-2013, JB/T203-2007, SY/T4109-2013, CB/T820-2002. The DAC curve can be generated automatically. Custom inspection procedures can be created according to actual workpieces (such as welds, forgings, castings, pipes, plates, axles, wheels, small-diameter tubes, etc.), so no test blocks are required for on-site inspection.
- Built-in inspection methods for forgings with flat-bottom and large flat-bottom holes. The AVG curve can be generated automatically to automatically calculate the inspection sensitivity of forgings and display the median defect aperture in real time.
- Φ value calculation: After finding the maximum echo of defects during forging inspection with straight probe, the equivalent size of defects can be automatically calculated and displayed.
- Two calibration modes: manual and automatic. The probe can be calibrated automatically (initial offset, K value) and the material sound velocity can be measured only by capturing the maximum echo.
- Screen freeze quantification function can capture waveforms at any time, including peak memory and envelope waveforms. Alarm functions include audible and visual alarms for signal entering gate, DAC gate and AVG gate positioning; the gate position, gate width and gate height can be adjusted arbitrarily.
- Defect positioning, sizing and qualitative analysis
Positioning: Real-time display of horizontal, depth (vertical) and sound path positions of defects;
Sizing: Real-time display of defect equivalent dB value;
Qualitative analysis: Manual empirical judgment can be carried out via echo envelope waveform.
- B-scan imaging function is available to detect fault layers of defects and display scanning schematic diagram.
- Extended software functions: Display of defect positioning on weld cross-section; echo-to-echo function under RF radio frequency mode.
